Products Available at DQ Precision Planting...

Here are the products we currently carry along with some basic information about each one. Please call George at 660-646-2150 (store) or Trevor (Store Manager) at 660-646-2150 or (cell) 660-973-6721 with any questions you have - you'll get down-to-earth information and farmer-friendly prices!

20/20 Airforce | 20/20 SeedSense | Blu-Jet | BullsEye Seed Tubes | eSet Vacuum Disks | J&M | Keeton | Kelly Harrows

Martin | McFarlane | Meridian Augers | Meridian Seed Tenders | MeterMax | Outback | Phillips | PrecisionMeter

Rhino | Schulte Mowers | Strobel | SureFire Seed Belts | Totally Tubular | Wolverine | Yetter


Heavy Duty Rear Blades

Rhino offers five series and eleven sizes of big blades to handle your demanding jobs! A Rhino blade means Rugged Durability, Superior Craftsmanship, Innovative Design, and Outstanding Performance. Whether you need to dig a ditch, repair a terrace, maintain a road, remove snow, clean a feed lot, or prepare a level surface, there is a Rhino blade right for you.

Features include heavy-duty three-point hitches, reinforced mainframes, massive solid steel kingpins, precisely-formed moldboards, and mainframe swing, moldboard angle, and moldboard tilt adjustments for rugged durability and outstanding performance. The 800 blade features all manual adjustments for economical operation. The 950 and 1540 blades are available with either manual or hydraulic adjustments to help fit a wide range of applications and needs. The 2500 and 3500 blades feature all hydraulic adjustments for greater operator convenience. Rhino blades - unequaled Selection, Quality, and Performance!

Every Rhino rear blade features a precision-formed moldboard with the exact curvature needed to achieve maximum penetration. The constant curvature and the perfect fit of the replaceable cutting edge allows Rhino blades to cut and roll the material rather than dragging, saving time, horsepower, and fuel. Another important feature not found on most competitive blades is the cutting edge which extends out past the end of the moldboard slightly, reducing the rate of wear on the moldboard.

Every Rhino big blade features a solid steel cold rolled kingpin, heavy-duty three-point hitch, massive mainframe, and reinforced moldboard for superior strength and durability. All pivot points are designed and built to exacting tolerances for a tight fit, long wear, and dependable service. Multiple manual adjustment settings and infinite hydraulic settings make Rhino blades one of the easiest rear blades to operate.

800 Blade - The 800 blade (2WD, 85 PTO HP tractors max.) is available in widths of 7' & 8' and features a heavy-duty CAT I-II hitch. Mainframe swing, moldboard angle, and moldboard tilt adjustments are easily made by relocating the index pins manually. The 800 blade features a maximum of 30" of offset from the center line of the tractor for working outside the tractor tire.

850 Blade - Available in a choice of 7' or 8' blades for a wide range of applications, the 850 rear blade offers manual or hydraulic adjustment for blade angle, blade offset, and blade tilt. This large rear blade has a three-point mount for tractors with up to 90 horsepower (2WD), heavy duty skid shoes to protect the blade and provide a level grade, and a reversible 1/2" x 6" cutting edge for a long life.

950 Blade - The 950 blade (2WD, 125 PTO HP tractors max.) is available in widths of 8' and 9' and features a heavy-duty CAT I-II, II QH threepoint hitch.

1540 Blade - The 1540 blade (2WD, 190 PTO HP tractors max.) is available in widths of 8' and 10' and features a heavy-duty CAT II-III three-point hitch and quick-hitch.

2500 Blade - The 2500 blade (2WD, 250 PTO HP tractors max.) is available in widths of 8', 10' and 12' and features a massive CAT II-III three-point hitch and quick-hitch.

3500 Blade - The 3500 blade (300 draw bar HP wheel-type tractors max.) is available in widths of 12' and 14' and features a massive CAT III-IV three-point hitch and quick-hitch.

For more details on each of these blades, download the brochure here.

Features and Benefits

  • Heavy-duty 3-point hitches
  • Solid steel kingpins
  • 1/2" x6" replaceable cutting edge
  • Optional skid shoes
  • Optional gauge wheels and quick attach end plates

Flex-Wing Rotary Cutters

Durability. Safety. Diversity
With more than 50 years of flex-wing technology and expertise, Rhino Flex-Wing rotary cutters are designed for performance, reliability, and value. Our Flex-Wing products all carry a standard multi-year limited gearbox warranty. To prevent wear and tear on the blade carrier, all Rhino Flex-Wings use square shouldered blade bolts that can't turn in the carrier.

Cutters range from the lighter-duty TS12 Stealth (12' model) to the super-duty FN240 Nitro (20' model) rated for a 4 1/2" diameter material. Flex-Wing rotary cutters may be used for mowing grass or weeds, maintaining pasture, shredding crops, mowing roadsides or highway rights-of-way, cutting brush, and/or maintaining commercial or industrial sites.

TS12 Stealth - Ideal for smaller 35-60 PTO horsepower tractors. Short wheel base and anti-scraping protection.

SD Series - Medium duty cut material up to 2" in diameter. Perfect for grass/weed mowing or stalk shredding.

FR Series (featured below) - Heavy duty with up to a 4" cutting capacity and cutting widths of 10 1/2', 14', 15', and 20'. This series is available as a 540 or 1000 RPM unit to give you more tractor and application options.

FN Series - For super-duty jobs with power to cut through brush and more with a cutting capacity of up to 5". Impressive cut capacity comes from its American-built gearboxes, the 325 HP power divider, and 285 HP outboard gearboxes which are backed for a six-year limited warranty.

Available with 540 and 1,000 RPM drives, the FR Series offers standard
Category V CV main drive and wing drivelines which provide a longer life
and less downtime.

The smooth top center deck is one of the strongest and easiest to clean of any cutter in the industry, and an obstruction-free underside of deck allows for enhanced airflow in the cutting chamber.

Flex-Wing Rotary Cutters Brochure


Return to Top

Click on these logos to see their product pages...

About Us | Contact Us | Rental Equipment | New & Used Equipment | Attachments | Products

20/20 SeedSense | Blu-Jet | eSet Vacuum Disks | J&M | Keeton | Kelly Harrows | Martin | McFarlane

Meridian Augers | Meridian Seed Tenders | Outback | Phillips | PrecisionMeter | RhinoSchulte Mowers | Strobel Box Scrapers

Totally Tubular Fertilizer Tubes | The Wolverine | Yetter | 20/20 Airforce | Bullseye Seed Tubes | MeterMax | Surefire Seed Belts